– Tanks –
Tank Liners
– 20 years of experience –
Tank lining services are provided by Industrial Panel Tanks to meet the needs of a wide range of industries and applications. To ensure the best possible performance and results, our liners are made with only the highest quality materials available. Allow us to meet all of your containment requirements and put your trust in our commitment to quality service and results.
Tank Lining Services You Can Trust
To ensure the highest quality results, all of our liners are designed and manufactured in-house. In addition, our team provides installation services to ensure proper coverage and reduce the risk of liner failure. Because of our professional design, installations usually take less than a week to complete. Main liners and secondary liners can be installed according to your specifications, depending on the application. Our liners are designed to be extremely compatible with the most inorganic and corrosive fluids.
Industrial Panel Tanks has a lot of experience with leaking tanks. Both in terms of liquid entering a tank, such as groundwater, and egress of chemicals/water from a tank. Water ingress is more likely to occur below ground, whereas chemical/water egress is more likely to occur above ground. This is usually due to corrosion or chemical erosion, with the latter being much easier to deal with. An underground fuel tank lining was installed to repair a recent job involving this scenario.
Over the years, Industrial Panel Tanks has discovered that tank manufacturers use lower-quality materials in the production of their tanks. As a result, the ultimate life of the unit is reduced; however, the lifespan can be greatly increased by re-lining. Our tank linings are a low-cost and quick fix for the majority of leaking tanks.
Glass Reinforced Plastic (GRP) or other materials such as Epoxy, Polyurethane, or Polyurea can be used to create tank linings. All of these solutions serve the sole purpose of retaining the contents of the vessel, thereby preventing leakage and protecting the existing substrate from further damage.
Tank linings are a low-cost alternative to tank replacement
Leaks can be very expensive, and depending on the nature of the stored material/liquid, they can be extremely harmful to the environment. The Environment Agency can and does regularly levy large fines on companies that fail to put in place the necessary safeguards to prevent a leak or spill when one occurs. Leaks are often difficult to detect, especially when vessels are underground; therefore, periodic checks of liquid levels and the presence of water are required in these cases.
Tank linings aid in the reduction of environmental risks
When a leak is discovered, the environmental impact should be the first consideration, and a solution to mitigate any contamination should be implemented immediately. Other questions to consider include whether the material/fluid is harmful to humans or animals. The cost of the liquid being lost is significant and may have an impact on the business’s operations as well as its balance sheet.
The moral is clear: prevention is preferable to cure. It is far better to avoid a potential disaster than to deal with it after it has occurred.
The advantages of lining a storage tank are numerous, and they include:
- Industrial Panel Tanks is a specialist in re-lining in confined spaces.
- A tank liner is a quickest and most effective way to repair a leaking water tank, both steel and concrete vessels.
- Tank liners require little to no maintenance.
- Non-bonded lining systems are high-quality short-term solutions that will extend the life of your existing tank.
- Flexible tank linings can hold highly corrosive and high-temperature chemicals, acids and alkalis, waste fluids, as well as water, water-based products, and gases.
- You can get your tank back in service quickly.
- A tank lining is an essential component of a secondary containment system.
- All of our tank liners are made to order to fit the shape, size, and configuration of Your tank, pit, pond, or secondary containment.
- Keeping leaks at bay.
- Extending the tank's life cycle.
- Most aggressive chemicals do not affect it.
- Lifetime cost savings as opposed to replacement.
- It is suitable for both potable and hot water.
- Hygienic surfaces that are clean.
Tank Lining Services with Years of Experience
We understand the requirements of most applications due to our years of industry experience. We can make recommendations on thickness and composition based on our experience and compatibility studies. Our liners have been used in industries such as oil, chemical, and agriculture, and they can also be used to line ponds and portable water tanks.